Md 555. Special Vacuum System Cleaner

MD 555 | Special cleaner for suction systems. MD 555 cleaner from the Dürr Hygiene system is a special acidic and foam-free cleaner for dental suction installations, including their drain pipes. The use of MD 555 cleaner is recommended in the case of problematic water (for example, very hard water, poorly soluble salts, etc.), as well as for drain pipes with insufficient slope. The use of MD 555 cleaner is suitable in special dental cleaning devices, for example, powder jet devices. If MD 555 is used periodically, the formation of deposits and blockages in the suction installation is avoided. Blockages of the suction equipment caused by the use of poorly soluble prophylactic products, such as prophylaxis powders, especially those based on calcium carbonates, are avoided, and existing encrustations are dissolved. Thanks to its active ingredients and special additives, MD 555 cleaner is especially suitable for amalgam separator installations. Furthermore, MD 555 cleaner can be used universally anywhere where hard water deposits must be removed on surfaces such as, for example, tiles, slabs or cuspidors. Features: - 2.5L container. How is it applied? In case of very hard water or presence of residues of prophylactic powders, apply MD 555 cleaner periodically as a 5% solution once or twice a week, e.g., during the lunch break. In case of extreme load, also daily. The minimum actuation time is 30 minutes and can be extended if necessary. For this, fill 50 ml of MD 555 cleaner with water up to 1 L of solution and aspirate it using the OroCup. Also pour 250 ml of solution into the cuspidor. After the actuation time, rinse the clean installation with at least 1 L of water. Apply MD 555 cleaner in problematic cases, e.g., for the remediation of suction systems intensely contaminated with biofilms, alternating it in this case with effective disinfectants such as Orotol plus or Orotol ultra, from one to five times per week at a concentration of 10% (fill 100 ml of MD 555 cleaner with water up to 1 L of solution). The optimum effect is achieved respectively with an actuation time of between 1 and 2 hours. Also pour 250 ml of solution into the cuspidor.